There isn’t a better tool for beveling than a miter saw. If you’re looking for accuracy and are hoping to get your wood cut exactly how you want, be it at any angle, this saw must be in your inventory. Discover the best 12 inch Miter Saw Blade in the following buying guide.
However, your work doesn’t just end with getting a stand up saw. Often you would find that the answer to increased efficiency and productivity is getting the right blade for your miter saw.
Simply put, your miter saw is incomplete without an equally brilliant blade.
You can save time, reduce costs, and gain more accuracy by attaching the right quality blade with your miter saw.
- 1 Top 12 Inch Miter Saw Blade Reviews
- 1.1 1.Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor
- 1.2 2. Freud LU91R012: 12″ Thin Kerf Sliding Compound Miter Saw Blade
- 1.3 3. DEWALT 12-Inch Miter Saw Blade, ATB, Thin Kerf, Crosscutting, 1-Inch Arbor, 80-Tooth (DW3128)
- 1.4 4. Makita A-94817 12-Inch 100 Tooth Ultra Coated Mitersaw Blade
- 1.5 5. NEIKO 10768A 12″ Carbide Chop Saw Blade, 80 Tooth with 1-Inch Arbor
- 1.6 6. Metabo HPT 12-Inch Miter Saw Blade, 80T, Fine Finish, 1-Inch Arbor
- 1.7 7. CMT 219.090.12 Industrial Sliding Compound Miter & Radial Saw Blade, 12-Inch x 90 Teeth
- 1.8 8. IRWIN Tools MARATHON Carbide Table Saw Blade / Miter Circular Blade, 12-Inch, 40T
- 1.9 9. DEWALT 12 in. 100T Ultra Fine Finish Miter Saw Blade (DWA112100)
- 1.10 10. Makita A-93728 12-Inch 80 Tooth Micro Polished Mitersaw Blade
- 2 Buyer’s Guide For 12 Inch Miter Saw Blade
- 3 Frequently Asked Questions
- 4 Conclusion
Top 12 Inch Miter Saw Blade Reviews
I’ll let you know the secret of finding the best 12-inch Miter Sawblade, so make sure you read till the end.
If you’re one to worry about wastage of raw materials, consider your problem solved as this 12-inch blade promises to save you 1/3rd of all wood lost on each cut.
The c-4 carbide teeth provide durability, so this blade won’t go blunt easily. Forget sanding as you get the smoothest finish with the chop master.
The application of this blade is best for low to medium intensity work, so heavy-duty work might be a bit of a stretch.
However, considering the performance of this blade, you won’t regret adding this product to your belt of tools.
- Fine cuts
- Less noisy
- Not suitable for heavy-duty work
Are you tired of your blades gradually underperforming due to wear out?
This particular choice of the blade will save you from spending a bucket load of money as not only is it made from the most premium quality carbide but also an addition non-stick coating slowing down corrosion.
The thin kerf will make for a faster, more precise cut and also makes the saw more power-efficient.
Freud’s design also focuses on minimizing vibration resulting in well- balanced maneuvering of the saw itself.
- Anti-vibration Design
- Heat resistant
- Slightly undersized
3. DEWALT 12-Inch Miter Saw Blade, ATB, Thin Kerf, Crosscutting, 1-Inch Arbor, 80-Tooth (DW3128)
Dewalt is back at it again with a 12-inch Miter Saw blade that gets the work done just as it promises. Thin kerf 80 teeth blades are a perfect option for time-saving, sharp cuts.
Don’t worry about vibration because of its computer balanced in design.
The only downside is that they come in steel, which is honestly well-suited however not as great in longevity as compared to carbide tipped blades.
It does, however, come with a non-stick coating so you can anticipate less friction.
- Well-balanced minimal vibration design
- Thin kerf
- Non-stick coating
- Not that durable
With Makita A-94817 cutting through wood has never been this effortless and don’t even get me started on the finish.
Makita’s 100 tooth blade will leave with almost no splinter and a glasslike clean cut. The Japanese know what they were doing as this ultra-thin kerf gets work done so efficiently.
You don’t have to worry about the amount of strain on the motor of your saw because you get minimum material loss and drag.
Precision is fundamental for woodwork thanks to the alternative top and alternative face tooth design, no issues there.
I can’t help but say that this blade is no less than perfection.
- Ultra-thin kerf
- Quiet and less vibration
- ATAF tooth design for precision
Who thought cutting through the wood will feel like passing a knife through butter? Nieko 10768A makes you think woodcutting is just easy.
The 80 teeth carbide-tipped blade offers cut so sharp, and baby smoothes it puts the rest to shame, especially when it comes to woodcutting.
Neiko takes into heed how important getting the blade to properly fit for the life and performance of the saw itself, which is why this option comes with a 20mm arbor reducer.
Its blade doesn’t mess around with gimmicks and offers a simple yet effective product.
- Heat resistant
- Ideal for crosscutting
- Not recommended for heavy-duty application
Metabo HPT 115436M has got your back to be it hardwood, softwood, high quality finish lumber, plywood, or MDF.
The 80 teeth blade leaves each cut with a finish that looks like it has been sanded and smoothened. Industrial-grade micro-grain tungsten carbide allows for the blade to last for days.
Rusting won’t be a problem either because of the electrophoresis coating on the blade. This blade would not be brazed easily and can handle extreme impact without a sweat.
Another great feature is the laser cut expansion slots offering a noiseless operation and reduced vibration.
- Easily fits on most saws.
- Less vibration and noise
- May need more HP
I don’t understand why this blade hasn’t gotten the attention it deserves. Crosscuts are a piece of cake thanks to the thin kerf.
Each cut is perfect and splinter-free. The teeth are made of micro-grain carbide fused with a tri-metallic bond.
The blade checks all the boxes in terms of durability and performance. It supports noise reduction and anti-vibration design.
Irwin tools offer an option you can’t refuse. Where should I even start? #400 grit diamond-ground teeth support the most durability of all the materials reviewed so far.
Irwin’s finish is glass-like thanks to the diamond ground teeth. If you’re looking for an option of a blade with a fewer number of teeth, this blade is most recommended.
Irwin’s blade is exceptional for heavy-duty industrial work. The design includes a heat vent and an expansion slot to reduce vibration.
This ultimately leaves with more precision and accurate cuts.
- Premium quality blade
- Applicable for cutting all kinds of wood
- A bit slow
Dewalt has made quite the name for itself when it comes to saw blades. And I can vouch for the fact that they deliver what they promise.
The blade supports about 100 teeth, so fast, clean cuts are no question.
Dewalt’s blades are also made of premium micro-grain carbide, which is the choice of many carpenters and woodworkers, as that indicates reduced splintering.
Issues such as friction, heat, and gum have been kept in mind when making the design as the blade has a tough coat.
- Less vibration
- Has an rpm limit
This blade is very well acclaimed by professionals as well as home users. Makita does justice to the consumer is king because the blade delivers in every regard.
An ultra-thin kerf gives you the most precise and sharp cuts. The material used to make this blade is Micro-Grain Carbide.
The teeth are Honed with up to 600 Grit for a Mirror Finish, so you get all the benefits you can imagine. Works on all kinds of wood, very low wastage of raw materials, and minimum friction.
The blade is versatile and can cut through all kinds of materials. This sturdy blade will be your best friend for many years as its one of the most durable blades in the market.
- Smoot finish cuts
- May blow over a lot of sawdust
Buyer’s Guide For 12 Inch Miter Saw Blade
To find the most befitting 12-inch blade for your miter saw, there are a few no-brainers that must be kept in mind when making a decision.
With increasing competition, it’s easy to get swayed and feel overwhelmed by choice.
Don’t worry, my specially curated guide to finding the Best 12-inch miter saw blade is sure to steer away from every cloud of indecision muddling your brain right now and highlight all the advantages you gain and warnings to avoid problems later.
Category of Blade
The intended use of the miter saw is what determines the type of blade you require.
Be it course cut, fine cut, circular, or reciprocating saw blades, your choice should always be according to the application.
Decide beforehand on whether you’re looking for a 12-inch blade to perform a specific task or one that is multi-purpose.
This will help you eliminate any options that don’t fit the criteria making your decision worth the buy.
Size of The Blade
Be sure on whether the blade will fit your saw or not. On top of that, assess the thickness and size of the blade.
If you plan on working quickly while making clean cuts opt for a narrower width.
However, if your priority is durability, a thicker blade is best, especially if you’re planning on using it on tough materials.
Type and Number of Teeth
The number of teeth present on the blade is the key determinant of the quality of cutwork.
An effortless, straight, and crisp cut can be attributed to a blade that has more teeth; however, a fewer number of teeth are faultless for cutting through denser objects.
Pay attention to the type of teeth on the blade as you will find options that are great for both ripping and crosscutting.
The Material of The Blade
Whether it be steel, carbide, or diamond finish, you are sure to come across options that will be made from either of these materials.
The blade material is what gives the blade its longevity, performance, and finish. Pick a material that will provide you with the best usage according to your needs.
Frequently Asked Questions
How thick can a 12-inch miter saw cut?
A miter saw can cut through 3-1/2 inch thick wood.
Will a 12 sliding miter saw cut a 6×6?
No, it would nearly be impossible to make a crosscut for 6×6 with a miter saw.
How many teeth should a miter saw blade have?
The number of teeth varies for each blade. However, we see that most saws work best within the range of 40-100 teeth.
Keep in mind that the more amount of tooth, the smoother the cut will be.
Are more teeth on a saw blade better?
More teeth generally mean a faster, sharper, and smoother cut.
Depending on what you’re using your saw, you should choose the number of teeth on the blade.
Are table saw and miter saw blades the same?
While the blades can be used conversely, the main difference between the blades is that their hook angle as a miter saw blades are usually at a negative hook angle.
Often an average working miter saw can offer the same performance of a premium one if a high-quality blade is attached.
A sturdy 12-inch miter saw blade can make or break your project as the smoothness and accuracy of your crosscuts are highly dependent on the quality of the blade you utilize.
If you don’t work with a dependable blade, you may also lose out on additional advantages such as cost cuts, less wastage of raw material, and productivity.
Hence it is pertinent to have a well-suited blade in your workshop.
Hopefully, the product review of the best 12-inch miter saw blade and the buyer’s guide have proven to help locate the right match.
In case you’re still confused, take a look at the buyer’s guide again so that you can narrow down your options.
- Best Miter Saw Blade Reviews
- Best Sliding Compound Miter Saw Reviews
- Best Miter Saw for Homeowner Reviews